
As an acclaimed entity, we are involved in supplying and manufacturing a commendable array of Mechanical Paver Finisher. The increasing popularity of the offered product in the market remains directly attributable to its accurate function and robust design. Customers can avail the entire range from us in varied sizes and dimensions as per their different requirements. Apart from this, our quality inspector rigorously tests the Mechanical Paver Finisher on numerous parameters of quality. It is highly appreciated for assuring low noise & stable operation with user friendly controls. Provided strong thermoplastic shed above driver's seat protects against high heat during summers.
Power Unit
Engine | Kirloskar make water-cooled electric start diesel engine, Model 4R 1040T, 76 hp (57 kW) @ 2200 rpm or equivalent |
Electrical System | |
Emission Standard | |
Eight Speed Reduction Gearbox |
Laying suitability | Option 1: Wet mix, GSB, DLC, DBM material Option 2: Bituminous |
Laying Capacity | 150 TPH |
Laying Thickness | 200 mm (Max) to 10 mm (Min) 8″ (Max) to 3⁄8″ (Min) |
Transmission | Mechanical |
Working Speed | 1.27 to 30 m/min (Max.) |
Travelling Speed | 16 km/hr (Max) |
Weight | 13,200 kg (29,145 lb) approx. |
Slope & Grade Control | Manual mode Optional: MOBA, Germany make electronic sensor |
Maintenance Shutters | On two side of machine |
Traction & Conveyor Pump – Motor | Sauer Danfoss, Germany or equivalent |
Screed width | 2.5 m (8′ 2½”) basic width, Hydraulically extendable up to 4.5 m (14′ 9⅛”), bolt on extension up to 5.0 m (16’5″) |
Crown (Manual) | -1° / +4° |
Screed Heating | Yes, with 8 LPG burner facility |
Screed Vibration | Yes (Fix Speed) |
Screed Tamping | No. Available on request. |
Rear Wheel | Four no. Pneumatic Tyre Size: 10.00 x 20 |
Front Wheel | Four no. Solid Rubber Tyre 550 Dia. x 175 mm wide |
Fuel | 105 L (23.2 gal) |
Hydraulic Oil | 202 L (44.5 gal) |
Cooling System | 6.5 L (1.4 gal) |
Engine Oil | 14 L (3.0 gal) |
Control Panel Type | Sliding |
Operator Seat | Double |
Travelling Function | Left & Right side |
Operating Function | Left & Right side |
Steering | Hydraulic |
Brake | Caliper disc brake on both the sides |
Conveyor & Auger | 2 Sets, one on each side |
Conveyor Drive | Hydraulic |
Conveyor Control | On / Off switch function on Operator Panel |
Auger Screw Size | Dia 300 mm (12″) |
Auger Material | Ni-Hard / High Chromium Steel Material |
Hopper Operation | |
Hopper Capacity | |
Hopper Width | Closed: 2.440 m (8′) |
Feed Tunnel Width |
Operating Height | |
Shipping Height (canopy tilted) | |
(w/o canopy & exhaust) | |
Shipping Width | |
Length (Tractor unit + screed) | |
Wheel Base | |
Dump Height | |
Thrust Roller Height |
![]() |
UNITER ENGINEERING PRODUCTS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |