
Hydrostatic Sensor Paver Finisher is a hydraulic and self propelled equipment, suited for laying the mat of various premix materials. This is primarily utilized for preparing the road base etc. This is accessible with width screed paving unit and lays the hot mix material on various retraced surfaces. Hydrostatic Sensor Paver Finisher provided by Uniter Engineering Products has a spreading screw, chain conveyor and paver hopper for ensuring efficacious and safe operation in less time, with high speed. Provided screed paving units have sensors for more advanced work.
Technical Specification
Power Unit
Engine | Kirloskar make water-cooled electric start diesel engine, Model 6R 1080 TA1, 125 hp (93 kW) @ 2200 rpm or equivalent |
Electrical System | 12 V DC |
Emission Standard | BS-III |
Speed Reduction Gearbox | Two speed reduction gearbox to achieve low speed for paving and high speed for traveling. |
Performance
Laying suitability | Option 1: Bituminous material Option 2: Bituminous, Wet mix, GSB, DLC,DBM material (Dual Purpose) |
Laying Capacity | 300 TPH |
Laying Thickness | 300 mm (Max) to 10 mm (Min) 12″ (Max) to 3/8″ (Min) |
Transmission | Hydrostatic |
Working Speed | 0 to 30 m/min (Max.) |
Travelling Speed | 0 to 16 km/hr (Max) |
Weight | 14,100 kg (31,200 lb) approx. |
Slope & Grade Control | MOBA, Germany make electronic sensor (Auto & Manual mode available) |
Maintenance Shutters | On three side of machine |
Traction & Conveyor Pump – Motor | Sauer Danfoss, Germany or equivalent |
Screed
Screed width | 2.5 m (8′ 2½”) basic width, Hydraulically extendable up to 4.5 m (14′ 91/8″), bolt on extension up to 5.5 m (18′ ½”) Option: Attachment up to 6.0m (19′ 8¼”) |
Crown (Manual) | -1° / +4° |
Screed Heating | Yes, with 8 LPG burner facility |
Screed Vibration | Yes, infinitely variable (0 to 50.00 Hz ) |
Screed Tamping | Yes, infinitely variable ( 0 to 33.33 Hz ) |
Under Carriage
Rear Wheel | Four no. Pneumatic Tyre Size: 10.00 x 20 |
Front Wheel | Four no. Solid Rubber Tyre 550 Dia. x 175 mm wide |
Refill Capacities
Fuel | 156 L (34.4 gal) |
Hydraulic Oil | 282 L (62.1 gal) |
Cooling System | 6.5 L (1.4 gal) |
Engine Oil | 14 L (3.0 gal) |
Operator Station
Control Panel Type | Sliding |
Operator Seat | Double Operator Seat |
Travelling Function | Left & Right side |
Operating Function | Left & Right side |
Steering | Hydraulic |
Brake | Caliper disc brake on both the sides |
Conveyor & Auger System
Conveyor & Auger | 2 Sets, one on each side |
Conveyor Drive | Hydraulic |
Conveyor Control | On / off switch function |
Auger Screw Size | Dia 300 mm (12″) |
Auger Material | Ni-Hard / High Chromium Steel Material |
Hopper & Feeding System
Hopper Operation | Hydraulic |
Hopper Capacity | 4.25 m3 (151 ft3) |
Hopper Width | Working: 3.22 m (10′ 6 3⁄4″) Closed: 2.44 m (8′) |
Feed Tunnel Width | 1.268 m (4′ 1 5⁄8″ ) |
Dimensions
Operating Height | 3.47 m (11′ 4 5⁄8″) |
Shipping Height (canopy tilted) | 2.90 m (9′ 6 1⁄4″) |
(w/o canopy & exhaust) | 2.68 m (8′ 9 1⁄2″) |
Shipping Width | 2.57 m (8′ 5 1⁄4″) |
Length (Tractor unit + screed) | 6.67 m (21′ 10 1⁄2″) |
Wheel Base | 2.61 m (8′ 6 7⁄8″) |
Dump Height | 0.70 m (2′ 3 1⁄2″) |
Thrust Roller Height | 0.54 m (1′ 9 1⁄4″) |
![]() |
UNITER ENGINEERING PRODUCTS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |